VIA Technologies EPIA-EX15000G - VIA Motherboard - Mini ITX User Manual download pdf (Page 63)

BIOS Setup

PNP/PCI CONFIGURATIONS

: Move

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

Menu Level

Select Yes if you are

using a Plug and Play

capable operating

system. Select No if

you need the BIOS to

Item Help

PNP OS Installed [No]

Reset Configuration Data [Disabled]

Resources Controlled By [Auto(ESCD)]

x IRQ Resources Press Enter

PCI/VGA Palette Snoop [Disabled]

PnP / PCI Configurations

Phoenix - AwardBIOS CMOS Setup Utility

Assign IRQ For VGA [Enabled]

Assign IRQ For USB [Enabled]

** PCI Express relative items **

Maximum ASPM supported [L0s&L1]

Maximum Payload Size [4096]

configure non-boot

devices

NOTE: This section covers some very technical items and it is

strongly recommended to leave the default settings as is unless you

are an experienced user.

PNP OS Installed

Setting Description

Yes BIOS will only initialize the PnP cards used for booting (VGA,

IDE, SCSI). The rest of the cards will be initialized by the

PnP operating system

No BIOS will initialize all the PnP cards

Reset Configuration Data

This field should usually be left “Disabled”.

Setting Description

Enabled Resets the ESCD (Extended System Configuration Data)

after exiting BIOS Setup if a newly installed PCI card or the

system configuration prevents the operating system from

Disabled Default setting

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 76 77

No comments

VIA Technologies EPIA-EX15000G - VIA Motherboard - Mini ITX User Manual Page 63