VIA Technologies EPIA-NL User Manual download pdf (Page 39)

BIOS Setup

First/Second/Third Boot Device

Set the boot device sequence as BIOS attempts to load the disk operating

system.

Setting Description

LS120 Boot from LS-120 drive

Hard Disk Boot from the HDD

CD-ROM Boot from CD-ROM

ZIP100 Boot from ATAPI ZIP drive

USB-FDD Boot from USB floppy drive

USB-ZIP Boot from USB ZIP drive

USB-CDROM Boot from USB CDROM

Legacy LAN Boot from network drive

Disabled Disable the boot device sequence

Boot Other Device

Enables the system to boot from alternate devices if the system fails to boot

from the “First/Second/Third Boot Device” list. When set to “Disabled”, no

alternate boot devices are allowed.

Settings: [Enabled, Disabled]

Boot Up NumLock Status

Set the NumLock status when the system is powered on. When set to “On”,

the keypad behaves as 10-key. When set to “Off”, the keypad behaves as

arrow keys.

Settings: [On, Off]

Typematic Rate Setting

Enables “Typematic Rate” and “Typematic Delay” functions.

Settings: [Enabled, Disabled]

Typematic Rate (Chars/Sec)

This item sets the rate (characters/second) at which the system retrieves a

signal from a depressed key.

Settings: [6, 8, 10, 12, 15, 20, 24, 30]

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 77 78

No comments

VIA Technologies EPIA-NL User Manual Page 39